What is the primary objective of **WEEE**?

**The primary objective of WEEE is to prevent the generation of waste electrical and electronic equipment (WEEE) and, in priority order, promote its preparation for re-use, recycling, and other recovery forms to minimize environmental and health impacts.** Established by Directive 2012/19/EU, it implements **Extended Producer Responsibility (EPR)**, requiring separate collection (targeting 65% of average EEE placed on the market over three prior years or 85% of WEEE generated), selective treatment per Annex II, and recovery/recycling targets by six Annex III categories post-15 August 2018 open scope.

Who is legally or professionally required to comply with **WEEE**?

**Producers—defined as manufacturers, brand owners, importers, and distance sellers placing EEE on the EU market—are legally required to comply with WEEE.** This includes registration in each Member State via national registers (accessible through the European WEEE Registers Network), annual reporting of EEE placed on the market (POM) per Commission Regulation 2017/699, and financing/organizing collection and treatment via collective **Producer Responsibility Organizations (PROs)** or individual schemes. Distributors must provide free "one-for-one" take-back and accept very small WEEE (≤25 cm) if sales area ≥400 m².

Does **WEEE** require an external audit or third-party certification?

**WEEE does not mandate external audits or third-party certification for producers.** Compliance is demonstrated through registration confirmations, POM reports in harmonized formats (Commission Regulation 2019/290, Decision 2019/2193), and evidence of financing/treatment (e.g., PRO contracts, mass-balance certificates). Member States conduct national enforcement, including audits of PROs and facilities; producers must retain records for inspections but no formal certification exists.

How often should an assessment for **WEEE** be performed?

**WEEE assessments should be performed annually to align with mandatory POM reporting deadlines set by each Member State.** Ongoing monitoring is required for product portfolio classification under open-scope Annex III categories, regulatory changes (e.g., 2025 evaluation), and internal audits of sales data, PRO performance, and treatment evidence to ensure collection targets (65%/85%) and selective depollution compliance.

What are the consequences of non-compliance with **WEEE**?

**Non-compliance with WEEE results in national penalties including fines, market bans, and retroactive charges enforced by Member States.** Producers face administrative sanctions for unregistered sales, under-reporting POM, or illegal exports (Annex VI controls); inspection/storage costs apply even to cleared shipments. Reputational harm and PRO delisting restrict market access; treatment facilities risk permit revocation.

An **WEEE** be mapped to other international frameworks?

**Yes, WEEE can be mapped to frameworks sharing EPR, circular economy, and hazardous waste principles.** Its waste hierarchy (prevention, re-use, recycling, recovery) aligns with Basel Convention transboundary rules; POM reporting and critical raw materials recovery complement OECD EPR guidelines; treatment standards support ILO occupational health norms for e-waste.

What is the first step to begin implementing **WEEE**?

**The first step to implement WEEE is to register as a producer in each Member State where EEE is placed on the market.** Identify "producer" status (including distance sellers), classify products into Annex III categories, join a PRO or establish an individual scheme, and prepare POM data per Regulation 2017/699 using the European WEEE Registers Network for national contacts.

What is the primary objective of **MLPS 2.0 (Multi-Level Protection Scheme)**?

**The primary objective of MLPS 2.0 is to establish a graded cybersecurity protection system ensuring security controls match the potential impact of system compromise on national security, social order, and public interests.** It classifies networks into five levels (1-5) based on harm severity to individuals, organizations, or the state, mandating commensurate technical, management, physical, and personnel controls per GB/T 22239-2019 and related standards.

Who is legally or professionally required to comply with **MLPS 2.0 (Multi-Level Protection Scheme)**?

**All network operators in mainland China must comply with MLPS 2.0 under Article 21 of the 2017 Cybersecurity Law.** This includes domestic enterprises, foreign-invested firms, cloud providers, and operators of IT, IoT, big data, or industrial systems; critical sectors like finance and energy often classify at Level 3+.

Oes **MLPS 2.0 (Multi-Level Protection Scheme)** require an external audit or third-party certification?

**Yes, MLPS 2.0 requires external security reviews by licensed Chinese firms for Level 2+ systems, with PSB approval.** Reviews score compliance (typically ≥75/100) across technical and management controls per GB/T 28448-2019; Level 3+ demands annual evaluations.

How often should an assessment for **MLPS 2.0 (Multi-Level Protection Scheme)** be performed?

**Assessments under MLPS 2.0 must occur biennially for Level 2, annually for Level 3, semi-annually for Level 4, and as mandated for Level 5.** Re-evaluations are also required after major changes; self-inspections apply to all levels.

What are the consequences of non-compliance with **MLPS 2.0 (Multi-Level Protection Scheme)**?

**Non-compliance with MLPS 2.0 risks fines up to RMB 100,000+, operational suspension, license denial, and intensified PSB inspections.** Enforcement since 2019 includes on-site raids; severe cases link to broader sanctions under the Cybersecurity Law.

An **MLPS 2.0 (Multi-Level Protection Scheme)** be mapped to other international frameworks?

**Yes, MLPS 2.0 control domains align with ISO 27001 Annex A and NIST CSF categories.** Organizational, physical, and technical controls map directly, enabling gap analysis via Statement of Applicability, though MLPS adds prescriptive grading and PSB oversight.

What is the first step to begin implementing **MLPS 2.0 (Multi-Level Protection Scheme)**?

**The first step is conducting a provisional self-assessment to classify systems into Levels 1-5 based on impact criteria.** Inventory assets, evaluate harm to national security/social order per GB/T 22239-2019, document rationale, then file with local PSB within 30 days for Level 2+.

WEEE vs MLPS 2.0 (Multi-Level Protection Scheme)

Standards Comparison

WEEE

Mandatory

2012

EU Directive for WEEE management and recycling

MLPS 2.0 (Multi-Level Protection Scheme)

Mandatory

2019

China's mandatory graded cybersecurity protection scheme

Quick Verdict

WEEE mandates EU e-waste recycling and producer responsibility for electronics firms, while MLPS 2.0 enforces graded cybersecurity on China's networks. Companies adopt WEEE for market access and MLPS for legal operation amid strict enforcement.

Waste Management

WEEE

Directive 2012/19/EU on WEEE

Cost

€€€€

Complexity

Medium

Implementation Time

12-18 months

Key Features

Extended Producer Responsibility finances end-of-life management
Open scope covers all EEE since August 2018
65% collection targets from market placement or generation
Mandatory selective depollution and treatment standards
National registration with harmonized reporting formats

Cybersecurity

MLPS 2.0 (Multi-Level Protection Scheme)

Multi-Level Protection Scheme 2.0 (MLPS 2.0)

Cost

€€€€

Complexity

Medium

Implementation Time

12-18 months

Key Features

Five-level impact-based system classification
Mandatory PSB registration and audits for Level 2+
Technical controls for cloud, IoT, big data
Governance and personnel segregation requirements
Ongoing re-evaluations and law enforcement oversight

Detailed Analysis

A comprehensive look at the specific requirements, scope, and impact of each standard.

WEEE Details

What It Is

Directive 2012/19/EU (WEEE Directive) is a binding EU regulation establishing Extended Producer Responsibility (EPR) for electrical and electronic equipment (EEE). It mandates prevention, collection, treatment, and recovery of waste EEE to minimize environmental risks and promote circular economy via waste hierarchy: prevention, reuse, recycling, recovery.

Key Components

Open scope (post-2018): 6 categories covering all EEE.
**Collection targets65% average EEE placed on market or 85% generated.
**Treatment standardsSelective depollution (Annex II), storage rules.
National registers, harmonized reporting (e.g., Regulations 2017/699, 2019/290).
EPR financing via PROs or individual schemes.

Why Organizations Use It

Legal transposition requires compliance for EU market access; reduces risks from illegal exports, penalties. Enables critical raw materials recovery, supports Green Deal. Builds stakeholder trust, competitive edge via eco-design.

Implementation Overview

Phased: gap analysis, multi-country registration, POM reporting, PRO joining, reverse logistics. Applies to producers/importers/distributors EU-wide; audits via national authorities. No central certification, but evidence-based enforcement.

MLPS 2.0 (Multi-Level Protection Scheme) Details

What It Is

MLPS 2.0 (Multi-Level Protection Scheme 2.0) is China's legally mandated cybersecurity framework under the 2017 Cybersecurity Law (Article 21). It classifies information systems into five protection levels based on potential harm to national security, social order, and public interests, requiring graded technical, organizational, and governance controls.

Key Components

Core domains: physical security, network protection, data security, access control, monitoring, and governance.
Standards like GB/T 22239-2019, GB/T 25070-2019 define baselines and extensions for cloud, IoT, big data.
Five levels with common controls plus level-specific requirements; compliance via third-party audits (75/100 score minimum for Level 2+).

Why Organizations Use It

Mandatory for all network operators in China to avoid fines, inspections, license suspensions.
Enhances risk management, resilience; aligns with ISO 27001/NIST; builds regulator trust and market access.

Implementation Overview

Phased: classify systems, gap analysis, remediate, external audit, PSB filing.
Applies to all sizes/industries in mainland China; ongoing re-evaluations required.

Key Differences

Aspect	WEEE	MLPS 2.0 (Multi-Level Protection Scheme)
Scope	EEE waste management, collection, recycling, treatment	Graded cybersecurity for networks, data protection
Industry	Electronics producers EU-wide, all sizes	All network operators in China, broad applicability
Nature	Binding EU Directive, national transposition	Mandatory Chinese regulation, PSB enforcement
Testing	Treatment standards, reporting, no formal audits	Third-party audits Level 2+, periodic re-evaluations
Penalties	National fines, market restrictions	Fines up to 100k yuan, operational suspension